Tri–Scan®Technology insures that there are no blind spots or exit lanes for your dog to bolt through your hidden dog fence. No matter where your dog is on its property or where the Receiver is on your dog’s neck…
When asked what the most important factor in your dog’s safety and comfort is in relation to electronic hidden dog fences, John Purtell, President of Perimeter Technologies states, “In practice it is how the signal is processed that creates the security of the…
Exclusive DM Technology™
Pet Stop Digital Modulation is Unique and is not AM, Our DMTechnology is used by the Air Traffic Controller Industry because this delivery signal can communicate multiplied levels of information to the Pet Stop Receiver your pet wears…
Dog Watch® Brand vs Pet Stop® and Hidden Dog Fence
–What is the Difference in Digital Modulations and Brand Signaling?
Pet Stop’s Exclusive DM Technology™ – Digitally Modulated Signal Guarantees 100% Accurate Activations
Pet Stop Digital Modulation is Unique in the Electronic Dog Fence Industry, Our DM Technology is similar to that used by the Air Traffic Controller Industry because this delivery signal can communicate multiplied levels (vertically) of information to the Pet Stop Receiver your pet wears. President of Perimeter Technologies Inc. John Purtell, “In practice it is how the signal is processed (talking about the Pet Stop Advanced Technology Receivers) that creates the security of the signal. All Pet Stop receivers incorporate processing that discriminates signals to prevent false activation.” Pet Stop Receivers are all Bi-Functional in that they 1.) Seek our Digitally Modulated Signal (insure 100% accuracy in activation) and 2.) Reject any Aberrant Signal (Guaranteeing that no false activation will occur by Pet Stop’s State of the Art Technology programed into every Pet Stop Receiver.”
John goes onto stress, “Because the FCC assigns the Pet Stop Signaling Modulation there is no other device in your home that transmits the same/similar signal as the Pet Stop Receiver must receive to activate. There is no way that our receiver activates due to any device either inside or outside your home because the FCC assigned communication platform is Pet Stop® Brand specific and our KHz settings are set at 4, 7, 10, 15KHz these lowest KHz transmissions are ideal for Pet Stop® Signaling because these KHz settings are NOT used by any appliance or electronics of any kind either inside or outside your home. http://www.atlantapetstopdogfence.com/pet-stop-vs-dog-watch-fm-signaling/
President John Purtell,“Aircraft radios use amplitude modulation (AM) rather than frequency modulation (FM). The advantage of AM is that a listener can hear two simultaneous transmissions on the same frequency. With FM, only the stronger one can be heard. There’s less risk of misunderstood communication with AM, which is a safety consideration in crowded air space.
John continues,“Pet Stop incorporates safety measures in all its designs. Any “misfires” are only due to the pet containment signal being rebroadcast onto some other device or ground loop. Dogwatch is also susceptible to the same occurrences. Therefore the claims you (Dog Watch) make are false and therefore misleading to the public.” John addresses this issue based on the False Claims of Dog Watch.” If you need further clarification on Dog Watch purposeful misdirection, give Mike Sinteff a call at (404)536-6770. The folks at Dog Watch are good people, they just need to understand that this is 2015 and not the 1970’s. All three commercial Electronic Dog Fence Companies Modulate with Digitally Modulated signals and do not “Misfire”.